- RS Stock No.:
- 184-4285
- Mfr. Part No.:
- MC74HC74ADTR2G
- Manufacturer:
- onsemi
- RS Stock No.:
- 184-4285
- Mfr. Part No.:
- MC74HC74ADTR2G
- Manufacturer:
- onsemi
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- PH
Product Details
High-Performance Silicon-Gate CMOS, The MC574HC74A is identical in pin out to the LS74. The device inputs are compatible with standard CMOS outputs, with pullup resistors, they are compatible with LSTTL outputs. This device consists of two D flip-flops with individual Set, Reset, and Clock inputs. Information at a D-input is transferred to the corresponding Q output on the next positive going edge of the clock input. Both Q and Qbar outputs are available from each flip-flop. The Set and Reset inputs are asynchronous.
Output Drive Capability: 10 LSTTL Loads
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 mA
High Noise Immunity Characteristic of CMOS Devices
Chip Complexity: 128 FETs or 32 Equivalent Gates
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 mA
High Noise Immunity Characteristic of CMOS Devices
Chip Complexity: 128 FETs or 32 Equivalent Gates
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
---|---|
Logic Family | 74HC |
Logic Function | D Flip-Flop |
Input Type | Single Ended |
Output Type | CMOS, LSTTL, NMOS, TTL |
Output Signal Type | D Type Flip-Flop |
Triggering Type | Positive Edge |
Mounting Type | Surface Mount |
Package Type | TSSOP |
Pin Count | 14 |
Set/Reset | Set/Reset |
Number of Elements per Chip | 1 |
Maximum Propagation Delay Time @ Maximum CL | 150ns |
Maximum Operating Supply Voltage | 6 V |
Dimensions | 5.1 x 4.5 x 1.2mm |
Width | 4.5mm |
Minimum Operating Supply Voltage | 2 V |
Automotive Standard | AEC-Q100 |
Height | 1.2mm |
Length | 5.1mm |
Minimum Operating Temperature | -55 °C |
Maximum Operating Temperature | +125 °C |
Propagation Delay Test Condition | 50pF |