Interroll M8 Motorised Drive Roller, 50mm x 300mm
- RS Stock No.:
- 437-2797
- Mfr. Part No.:
- 8AFKJAE6FT/H50T
- Manufacturer:
- Interroll
Discontinued product
- RS Stock No.:
- 437-2797
- Mfr. Part No.:
- 8AFKJAE6FT/H50T
- Manufacturer:
- Interroll
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- DE
Product Details
Interroll Motorised Drive Roller
The Interroll BT100 series motorised driver roller has a length of 450mm and a diameter of 50mm. This electrically driven roller has a gear ratio of 21:1 and spindle thread size is M8. It replaces external components such as motors and gears that require frequent maintenance. This device can be used in dusty and/or moist environments. Additionally, the roller is powered by a brushed, mechanically commutated 24VDC motor.
Note:
Should not be used with Thyristor controlled power supply units.
Note:
Should not be used with Thyristor controlled power supply units.
Features and Benefits
Grooved to provide the drive to 9 slave rollers
Bush type motor
Quiet running with a noise level of approximate 47dB(A)
Service life of approximate 6000 operating hours (effective running time)
15 starts/stops per minute
Bush type motor
Quiet running with a noise level of approximate 47dB(A)
Service life of approximate 6000 operating hours (effective running time)
15 starts/stops per minute
Certifications
IP54 rated
Specifications
Attribute | Value |
|---|---|
| Roller Diameter | 50mm |
| Roller Length | 300mm |
| Component Type | Motorised Drive Roller |
| Load Capacity | 120kg |
| Ratio | 21 |
| Spindle Thread Size | M8 |
| Maximum Conveying Speed | 24m/min |
| Maximim Motor Voltage | 30V |
| Minimum Motor Voltage | 18V |