TE Connectivity AD Ratchet Crimping Tool for DuraSeal and PolyCrimp terminals

  • RS Stock No. 864-6900
  • Mfr. Part No. AD-1522-1-CRIMPING-TOOL
  • Manufacturer TE Connectivity
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

TE Connectivity AD-1522-1 Hand Crimping Tool for DuraSeal Splices

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

TE Connectivity DuraSeal Handing Crimping Tool - Overview

From TE Connectivity, an easy to use hand operated crimping tool made from high-quality materials for crimping DuraSeal crimp splices onto wire. The crimping tool consists of handles and two crimping jaws. The crimping jaws contain three crimping chambers with clearly marked wire sizes. The crimping tool is supplied with a pre-set crimp depth to ensure that the correct combination of tensile strength and insulation integrity is achieved when crimping. A ratchet controlled release mechanism ensures that the handles of the crimp tool do not release until a full crimp cycle is achieved.

Key Features and Benefits

• Easy to use with a smooth operation
• Pre-set crimp depth ensures crimp integrity
• Ratchet controlled release mechanism ensures full crimp cycle
• Crimping cavities are polished for maximum crimping reliability
• Ergonomic design for operator comfort

Questions and Answers

What terminals can this tool be used with?
This hand crimping tool is used for crimping DuraSeal splices with a wire size range from 22 to 10 AWG

What Kind of Crimp Does this Tool Produce?
This tool produces an open barrel style crimp

TE Connectivity Hand Crimp Tools for Splice Terminals

Specifications
Attribute Value
Series AD
Crimp Connector Type DuraSeal and PolyCrimp terminals
Crimp Tool Type Ratchet
For Use With Splices 10-22 AWG
Wire Size mm² 0.3 → 5mm²
Wire Size AWG 22 → 10
Overall Length 228.6mm
20 In stock for delivery within 6 working days
Price (VAT excluded) Each
TWD 7,467.00
(exc. GST)
TWD 7,840.00
(inc. GST)
units
Per unit
1 +
TWD7,467.00