- RS Stock No.:
- 453-331
- Mfr. Part No.:
- 9011680000
- Manufacturer:
- Weidmuller
- RS Stock No.:
- 453-331
- Mfr. Part No.:
- 9011680000
- Manufacturer:
- Weidmuller
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- DE
Product Details
Ratchet Bootlace Ferrule Crimp Tool
A cord end ferrule ratchet tool to suit ferrules 0.5 through to 6 mm. This ferrule crimp tool crimps ferrules with and without insulating plastic collars. Ferrule insertion is from the side. Pull-off figures are as follows: 0.25 mm2 = 15 N, 0.5 mm2 = 30 N, 0.75 mm2 = 30 N, 1.0 mm2 = 30 N, 1.5 mm2 = 40 N, 2.5 mm2 = 50 N, 4.0 mm2 = 50 N, 6.0 mm2 = 60 N
Long-handled variant - may reduce the risk of Repetitive Strain Injury
Weidmuller Crimping Tool, Hand-Operated, 0.5 to 6mm² Cross-Section Range - STRIPAX Series - 9011680000
Quickly add a connection to your electrical cabling with the help of this crimping tool from Weidmuller. It's designed for handheld operation, so it's easy to carry for use on different job sites. For versatility, you can use the unit to crimp both insulated and uninsulated bootlace wire-end ferrules. An integrated ratchet mechanism helps you to achieve precise joins, while a release option lets you conveniently free the wire in case of incorrect operation. This tool is ergonomically designed to fit comfortably into your hand, reducing fatigue when used for long periods of time.
Features & Benefits
• Ferrule insertion from the side of the unit for ease of use
• Light weight of 380g makes it easy to handle
• Achieves an airtight crimp to minimise the risk of wire corrosion
• Ensures quick conductor connections as there's no need for soldering
• Light weight of 380g makes it easy to handle
• Achieves an airtight crimp to minimise the risk of wire corrosion
• Ensures quick conductor connections as there's no need for soldering
Applications
• Electrical installations
• Cable assemblies
• Maintenance
• Cable assemblies
• Maintenance
Do I need to lubricate this crimping tool?
To ensure optimal performance, it's recommended that you lubricate this unit approximately every 10,000 cycles or after it's been exposed to contaminants.
General Support Tooling
Specifications
Attribute | Value |
---|---|
Series | PZ |
Product Type | Crimp Tool |
Operation | Hand |
For Use With | Wire Ferrules |
Wire Size AWG | 24 → 10AWG |
Ratcheting | Yes |
Crimp Profile | Trapezoidal |
Overall Length | 200 mm |