Fluke 771 Clampmeter, 100mA dc

  • RS Stock No. 287-642
  • Mfr. Part No. FLUKE 771
  • Manufacturer Fluke
Product overview and Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CN
Product Details

Fluke 771 mA Process Clamp Meter

Need more hours in your day? Save time by not breaking the loop on 4-20 mA signal measurements with the Fluke 771 Process Clamp Meter.

Are you spending time:

•Taking mA measurements by removing a wire and breaking the loop
•Calling the control room to isolate a loop
•Testing analog input/output on a console
•Troubleshooting devices with mA inputs and outputs
•Repairing intermittent or erratic 4-20 mA loops
•Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Here are some specific ways the Fluke 771 clamp meters will help you:

Measure mA signals for PLC and control system analog I/O without breaking the loop
• Measures low level dc current
• Correlate process indication with real physical value

Measure output signals from transmitters without breaking the loop
• Maintain and troubleshoot process and automation equipment without breaking the loop
• No disruption to the process

Detachable clamp with extension cable
• Measurements in tight locations
• Enables measurements in difficult situations

Measurement Spotlight
• Illuminates hard to see wires in dark enclosures
• Measurement process is easier and quicker

Measure up to 99.9 mA range non-contact
• Wide range of measurements
• Measures 10 to 50 mA signals in older control systems

Automatic power off
• After 15 minutes and 2 minute automatic off for backlight and spotlight
• Saves battery life

Features

• Best in class 0.2% accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without “breaking the loop”
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements

Supplied with

2 AA batteries, soft carry case and user manual.

Fluke Clamp Meter

The Fluke milliamp process clamp meter measures current between 4mA and 20mA loops without breaking the loop or bringing down the system.

Features and Benefits

Best in class 0.2% accuracy 0.01mA resolution and sensitivity Measure mA signals for PLC and control system analogue I/O Dual backlit display with both, mA measurement and per cent of 4mA to 20mA span Measurement Spotlight illuminates hard to see wires in dark enclosures Detachable clamp with an extension cable for measurements in tight locations Measure between 10mA and 50mA signals in older control systems using the 99.9mA range Automatically change the 4mA to 20 mA output for remote testing Power-saving features, auto-off, backlight timeout extend battery life Hold function captures and displays changing measurements

Applications

Petrochemicals Oil and gas Food and beverage Pharmaceuticals

Certifications

IP40 EN61326-1

Specifications
Attribute Value
Absolute Maximum AC Current Measurement -, - A ac
Absolute Maximum DC Current Measurement 99.9mA dc
Model Number 771
DC Current Measurement Resolution 10uA
Best DC Current Accuracy ±1% + 5 Digits
Clamp Meter Type Milliamp Process Clamp
Maximum Operating Temperature +50°C
Jaw Capacity Busbars 4.5mm
Maximum Conductor Size 4.5mm
Length 212mm
Power Source Battery
Display Type LCD
Battery Type AA
Weight 260g
Battery Life 20 h
Height 38mm
Minimum Operating Temperature -10°C
Dimensions 212 x 59 x 38mm
Width 59mm
1 Within 3 working day(s) (local stock)
46 Within 6 working day(s) (Global stock)
Price (VAT excluded) Each
TWD 29,474.00
(exc. GST)
TWD 30,948.00
(inc. GST)
units
Per unit
1 +
TWD29,474.00