Moflash E1EX Series Metallic Stainless Steel Cable Gland, M20 Thread, 9mm Min, 15mm Max, IP66, IP68
- RS Stock No.:
- 901-0659
- Mfr. Part No.:
- 50210
- Manufacturer:
- Moflash
Temporarily out of stock - back order for despatch 03/06/2024, delivery within 6 working days
Added
Price (VAT excluded) Each
TWD4,210.00
(exc. GST)
TWD4,420.50
(inc. GST)
| Units | Per unit |
| 1 + | TWD4,210.00 |
Alternatives
This product is not currently available. Here are our alternative recommendations.
Moflash A2EX Series Metallic Stainless Steel Cable Gland, M20 Thread, 11mm Min, 15mm Max, IP66, IP68
- RS Stock No.
- 901-0668
Price (VAT excluded) Each
TWD2,297.00
(exc. GST)
TWD2,411.85
(inc. GST)
- RS Stock No.:
- 901-0659
- Mfr. Part No.:
- 50210
- Manufacturer:
- Moflash
Product overview and Technical data sheets
Legislation and Compliance
Product Details
E1EX Captive Component Gland for Explosive Atmospheres
The E1EX Captive Component Gland is designed for use with steel wire and aluminium armoured cable in hazardous areas with a potentially explosive atmosphere. Equipment protection levels: Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db II 2G, II 2D, II 3G.
For indoor, outdoor and Group II hazardous areas
Two part handling, no loose parts
Captive Cone and Cone Ring provide an armour clamp and earth bond for steel wire armour and aluminium armour
Patented disconnect system that allows inspection of armour clamp and inner seal after assembly
Factory fitted with a specially formulated elastomeric seal for built-in safety, seals on the inner sheath of the cable to IP66 / IP68
Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel
Complete with a sealing gasket and end cap safety gauge for correct gland selection
Two part handling, no loose parts
Captive Cone and Cone Ring provide an armour clamp and earth bond for steel wire armour and aluminium armour
Patented disconnect system that allows inspection of armour clamp and inner seal after assembly
Factory fitted with a specially formulated elastomeric seal for built-in safety, seals on the inner sheath of the cable to IP66 / IP68
Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel
Complete with a sealing gasket and end cap safety gauge for correct gland selection
Approvals
ATEX, IECEx, INMETRO, SANS/IEC.
Specifications
Attribute | Value |
|---|---|
| Thread Size | M20 |
| Maximum Cable Diameter | 15mm |
| Minimum Cable Diameter | 9mm |
| Material | Stainless Steel |
| Colour | Metallic |
| Series | E1EX |
| IP Rating | IP66, IP68 |
| Locknut Included | No |
| Hazardous Area Certification | ATEX |
| Maximum Operating Temperature | +95°C |
| Minimum Operating Temperature | -20°C |