- RS Stock No.:
- 749-6451
- Mfr. Part No.:
- ARD00354
- Manufacturer:
- Microchip
- RS Stock No.:
- 749-6451
- Mfr. Part No.:
- ARD00354
- Manufacturer:
- Microchip
Legislation and Compliance
Product Details
MCP6N11 Instrumentation Amplifier Wheatstone Bridge Reference Design
This board demonstrates the performance of Microchips MCP6N11 instrumentation amplifier (INA) and a traditional three op amp INA using Microchips MCP6V26 and MCP6V27 auto-zeroed op amps. The input signal comes from an RTD temperature sensor in a Wheatstone bridge. Real world interference is added to the bridges output, to provide realistic performance comparisons. Data is gathered and displayed on a PC, for ease of use. The USB PICmicro® microcontroller and included Graphical User Interface (GUI) provides the means to configure the board and collect sample data.
Features and Benefits:
RTD temperature sensor
INA signal conditioning
PICmicro signal conditioning and communications
PC software (GUI): Thermal Management Utility
INA signal conditioning
PICmicro signal conditioning and communications
PC software (GUI): Thermal Management Utility
Software:
Microchip provides a free software called 'Thermal Management Utility'. You can find a link for it below. Thermal Management Utility handles communications through the USB connected to your board and will display data on a strip chart. It can store single points of calibration ecoefficiency on the PIC MCU and tells the PIC MCU how to configure the average filter.
http://ww1.microchip.com/downloads/en/DeviceDoc/ThermalManagementUtility-v1.5.8.zip
http://ww1.microchip.com/downloads/en/DeviceDoc/ThermalManagementUtility-v1.5.8.zip
Whats in the box?
- 1x ARD00354 Board
- 1x USB Cable
- 1x Information sheet
Supplied with
USB cable
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Instrumentation Amplifiers, Microchip
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high common-mode rejection ratio, and very high input impedances.
Specifications
Attribute | Value |
---|---|
Analogue Function | Wheatstone Bridge |
Kit Classification | Reference Design |
Featured Device | MCP6N11, MCP6V26, MCP6V27 |