Formable Coil Heater, 400mm, 180 W, 230 V ac
- RS Stock No.:
- 374-3110
- Mfr. Part No.:
- RCF180C
- Manufacturer:
- Acim Jouanin
The image is for reference only, please refer to product details and specifications
5 In stock for delivery within 6 working days
Added
Price (VAT excluded) Each
TWD4,968.00
(exc. GST)
TWD5,216.40
(inc. GST)
| Units | Per unit |
| 1 - 4 | TWD4,968.00 |
| 5 - 9 | TWD4,774.00 |
| 10 + | TWD4,671.00 |
- RS Stock No.:
- 374-3110
- Mfr. Part No.:
- RCF180C
- Manufacturer:
- Acim Jouanin
Legislation and Compliance
- COO (Country of Origin):
- FR
Product Details
Cold-formed heating resistors
Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.
Strip Heating Elements
Note
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them
Warning
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Approvals
UL Recognised; CSA Certified
Specifications
Attribute | Value |
|---|---|
| Power Rating | 180 W |
| Supply Voltage | 230 V ac |
| Length | 400mm |
| Width | 3.3mm |
| Heating Element Form | Formable Coil Heaters |