- RS Stock No.:
- 869-7560
- Mfr. Part No.:
- RSF43YFP
- Manufacturer:
- Sensata / Cynergy3
- RS Stock No.:
- 869-7560
- Mfr. Part No.:
- RSF43YFP
- Manufacturer:
- Sensata / Cynergy3
Product overview and Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Cynergy3 Horizontal Float Switches
Horizontal float switches with a low-cost compact design and WRAS approval. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.
Features & Benefits
Low cost compact design
Available in Nylon, Polypropylene and Poly Phenylene Sulfide (PPS)
Consists of reedswitch and pivoted actuator magnet
Can be used for N/O or N/C operation
Internal and external mounting options available
All units WRAS approved
WRAS approval explained
WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.
What materials can you choose from?
Nylon
Polypropylene
Polypropylene Sulfide (PPS)
Polypropylene
Polypropylene Sulfide (PPS)
Features and Benefits
Operating temperature: -10 °C to +120 °C
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
Typical Applications
These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.
Note
Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.
Approvals
UL recognised
Sensata Cynergy3 Horizontal Float Switch, NO/NC, M12 - RSF40 Series - RSF43YFP
Safeguard your liquid container from hazardous overflow using this Sensata Cynergy3 float switch. It carefully monitors levels to keep them within a safe preset range. As the liquid rises or falls, the float on the surface of the liquid uses magnetic force to change the switch position. This sends a signal to switch on or turn off flow. The switch features horizontal mounting, so you can install it in tanks with no vertical access.
Features & Benefits
• Standard M12 mounting thread for compatibility with standard connections
• Nylon body material is lightweight and abrasion-resistant, so it's durable and easy to install
• Compact design for use with small pumps and setups
• Nylon body material is lightweight and abrasion-resistant, so it's durable and easy to install
• Compact design for use with small pumps and setups
Is this switch 'normally open' or 'normally closed'?
You can set the switch output to either 'normally open' (NO) or 'normally closed' (NC). This gives you flexibility in how you configure your electrical circuit.
Is the switch durable?
The switch connection is insulated with a nitrile-rubber gasket that resists water and oil. This material is strong enough to withstand a build-up of pressure without failing.
Specifications
Attribute | Value |
---|---|
Device Type | Float |
Mounting Type | Horizontal |
Switch Output | NO/NC |
Body Material | Nylon |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +75°C |
Maximum AC Voltage | 240V |
Maximum DC Voltage | 120V |
Maximum Current | 600 mA |
Gasket Material | Nitrile |
Series | RSF40 |
Standards Met | WRAS |
Current Rating | 600 mA |