DSPIC33EP512GP502-I/SP Microchip, 16bit Digital Signal Processor 5.5MHz 512 kB Flash 28-Pin PDIP
- RS Stock No.:
- 810-3914
- Mfr. Part No.:
- DSPIC33EP512GP502-I/SP
- Manufacturer:
- Microchip
The image is for reference only, please refer to product details and specifications
8 In stock for delivery within 6 working days
Added
Price (VAT excluded) Each
TWD189.00
(exc. GST)
TWD198.45
(inc. GST)
| Units | Per unit |
| 1 - 3 | TWD189.00 |
| 4 + | TWD184.00 |
- RS Stock No.:
- 810-3914
- Mfr. Part No.:
- DSPIC33EP512GP502-I/SP
- Manufacturer:
- Microchip
Product overview and Technical data sheets
Legislation and Compliance
Product Details
dsPIC33EPxxxGP/MC20x/50x 16-Bit Digital Signal Controllers
The dsPIC33EPxxxGP/MC20x/50x family of Digital Signal Controllers from Microchip is a comprehensive range of 16-bit DSPs based upon the dsPIC33E core, offering up to 70MIPS performance. The range has an extensive array memory and package variants, all offering a large variety of on board peripherals.
Microcontroller Features
70 MHz Max. CPU Speed
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)
21 to 53 I/O Pins – Model Dependant
Power-On Reset (POR)
Power-Up Timer (PWRT)
Oscillator Start-Up Timer (OST)
Brown-Out Reset (BOR)
Extended Watchdog Timer (WDT)
High/Low-Voltage Detection (HLVD) Module
In-Circuit Serial Programming (ICSP)
In-Circuit Debug (ICD)
Peripherals
High-Speed PWM
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)
10/12-Bit Analogue-to-Digital Converter (ADC) - 6 to 16 Channels Depending on Model
Five 16-Bit Timers
Two 32-Bit Timers
Operational Amplifier – 2 to 3 Depending on Model
Comparators – 3 to 4 Depending on Model
Charge Time Measurement Unit (CTMU) – Supports mTouch™ Capacitive Touch Sensing
Two UART Modules
Two SPI Modules
ECAN™ Module
Two I2C™ Modules
Programmable Cyclic Redundancy Check (CRC)
Peripheral Pin Select (PPS)
Peripheral Trigger Generator (PTG)
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
|---|---|
| Maximum Frequency | 5.5MHz |
| Data Bus Width | 16bit |
| RAM Size | 48 kB |
| Instruction Set Architecture | RISC |
| Program Memory Size | 512 kB |
| Program Memory Type | Flash |
| Mounting Type | Through Hole |
| Package Type | PDIP |
| Pin Count | 28 |
| Typical Operating Supply Voltage | 3 to 3.6 V |
| Number of UART Channels | 2 |
| Pulse Width Modulation | 0 |
| ADCs | 6-ch x 10 bit, 6-ch x 12 bit |
| Length | 35.56mm |
| Number of ADC Units | 1 |
| ADC Channels | 12 |
| Number of CAN Channels | 1 |
| Minimum Operating Temperature | -40 °C |
| ADC Resolution | 10 bit, 12bit |
| Dimensions | 35.36 x 7.49 x 3.81mm |
| Timers | 5 x 16 bit, 5 x 32 bit |
| Number of USART Channels | 0 |
| Width | 7.49mm |
| Number of LIN Channels | 0 |
| Height | 3.81mm |
| Timer Resolution | 16 bit, 32bit |
| Number of PCI Channels | 0 |
| Number of I2C Channels | 2 |
| Number of Timers | 10 |
| Number of Ethernet Channels | 0 |
| USB Channels | 1 |
| Number of SPI Channels | 2 |
| Maximum Operating Temperature | +85 °C |